RestoreX can be used to restore and clean many surfaces in your Bathroom.
Bathroom Tiles, Chrome , Shower Glass , Shower Acrylic Walls and Plastic Base, Plastic Basins and Toilet seats. Porcelain Toilets and Basins. Bathroom Taps.
Using gloves apply RestoreX to a slightly damp cloth and rub over tiles. For tiles that are near new the white pad will remove any water mark contamination. Wash down tiles with warm water and dry.
For Matt Tiles Apply Restorex to dry or slightly damp cloth or white pad& scrub affected area, if necessary for heavier staining use a red pad, rinse and dry.
PLEASE DO NOT USE RED PADS ON HIGH GLOSS TILES. YOU WILL SCRATCH YOUR TILES. FOR HIGH GLOSS TILES USE A CLOTH OR THE WHITE PAD ONLY.
Wet glass then apply Restorex to a dry cloth or white pad, work over entire surface. Rinse and dry. If your glass is covered in hardwater marks, limescale or other mineral deposits you may need to use a red pad. PLEASE DO NOT USE ANY OTHER PAD ON YOUR GLASS OTHER THEN THE WHITE OR RED PADS.
If you are still having problems with staining on your shower glass it will need to be restored by a professional, please call : 0274 512 228, (NZ ONLY) for advice on how to find a glass restoring professional .
Using gloves apply RestoreX to a slightly Dry cloth and rub Chrome and Taps. Leave on for 5 minutes, rub again with a cloth wash off and dry.
For Shower Chrome that is severely stained leave RestoreX on for 10 minutes, and use the white pad provided to remove lime scale. Rinse off and dry. If there is still lime scale attached to your shower chrome you will need to repeat the above process and use the red pad provided to remove the attached lime scale.
Dampen surface then Apply Restorex with a DRY cloth or white pad over entire area, work until surface feels smooth, rinse and dry. Mild staining will shift immediately; heavier staining will require you to repeat the process. If you have severe staining on your shower base and walls and ,they are aged, you will need to leave restorex on for a couple of hours and scrub with the white pad provided wash off with warm soapy water then dry.
Using gloves apply RestoreX with a dry or slightly dampened cloth and rub over area to be cleaned. Leave on for 5 minutes and rub the surface until the surface is clean. Repeat if necessary. Clean off with warm water,then dry and dry.
Put your gloves on. Remove water from toilet using two old towels. Using a dry cloth apply RestoreX to toilet. Leave on for 5 minutes and scrub water marks with the white or red pad. If severe staining, you may need to apply and leave for 30 minutes or so & then work over with red pad.
Using gloves apply RestoreX with a slightly damp cloth and rub over area to be cleaned. Leave on for 5 minutes and using the white pad provided scrub the basin and staining will begin to lift. Repeat if necessary. Wash off with warm water and dry. If you have difficult staining around the plug and the base of the tap apply RestoreX with a dry cloth and leave for 30 minutes. Using the red pad scrub these area’s. Staining will begin to lift. Repeat if necessary. For very hard stains around the plug and base of tap you may need to use a small blade to lift the contamination off alternatively leave RestoreX on overnight to soften staining and use a hard bristle toothbrush. Wash off with warm water and dry.
Some examples of the successes our customers are having using RestoreX. If you have a 'Before and After' story you would like to share, please email both images to email@example.com and we may post you on this site.
Terms & Conditions
@2015 RestoreX All rights reserved